Liquid-phase peptide synthesis (LPPS) is a way of building peptides in which every coupling and deprotection reaction happens in solution rather than on an insoluble resin bead. The term covers two related things: the classical solution-phase chemistry used for most of the 20th century, and a newer family of methods where the growing chain carries a soluble tag that makes it easy to pull out of the reaction mixture after each step. Both are used mainly for short peptides and for large-scale manufacturing, while solid-phase synthesis (SPPS) dominates small-scale research production.
Our earlier article "Peptide Synthesis Methods: Solid-Phase vs Liquid-Phase" compares the two approaches side by side. This guide goes deeper into LPPS itself: how a solution-phase cycle runs, what the tag technologies do, why manufacturers combine LPPS with SPPS, and what any of it means for a researcher reading a certificate of analysis.
What "Liquid-Phase" Means Now
The vocabulary has shifted, which is why searches for "liquid phase peptide synthesis" return pages that seem to describe different things.
A 2022 review in Chemical Reviews by Sharma, Kumar, de la Torre and Albericio, titled "Liquid-Phase Peptide Synthesis (LPPS): A Third Wave for the Preparation of Peptides", separates three generations:
| Generation | Name used in the review | Where the chain sits | How intermediates are isolated |
|---|---|---|---|
| First | Classical solution-phase synthesis | Free in solution | Extraction, crystallization or chromatography of each intermediate |
| Second | Solid-phase peptide synthesis (SPPS) | Anchored to an insoluble resin | Filtration and washing of the resin |
| Third | Liquid-phase peptide synthesis (LPPS) | In solution, attached to a soluble tag | Precipitation, extraction or membrane filtration driven by the tag |
In the authors' framing, modern LPPS combines the advantages of the first two: reactions run in homogeneous solution, as in classical chemistry, but the tag gives a simple, repeatable way to separate the product from excess reagents, which is the main convenience of SPPS. Many vendor and manufacturer pages still use "LPPS" and "solution-phase synthesis" interchangeably, so it helps to check which one a source means.
How a Classical Solution-Phase Synthesis Works
In classical solution-phase work, each peptide bond is formed between two protected building blocks dissolved in an organic solvent. A typical cycle has four parts:
- Protection. The amine of one partner and the carboxyl of the other are blocked so that only the intended bond can form. Reactive side chains (lysine amines, aspartic and glutamic acid carboxyls, cysteine thiols and others) carry their own protecting groups.
- Activation and coupling. The free carboxyl is converted into a reactive form, usually an active ester or anhydride made with a coupling reagent, and then reacts with the free amine to form the amide bond.
- Work-up and isolation. Unlike SPPS, there is no resin to wash. The intermediate has to be separated from leftover reagents and by-products by aqueous extraction, crystallization or chromatography, and it can be analysed before the next step.
- Selective deprotection. One protecting group is removed to expose the next reactive site, and the cycle repeats.
Two protecting-group schemes are common in solution work. The older one pairs Boc (tert-butyloxycarbonyl) or Z (benzyloxycarbonyl) groups on the amine with benzyl-type side-chain protection. Fmoc-based schemes, familiar from SPPS, are also used in solution and are the basis of most modern tag-assisted methods.
Stepwise vs fragment condensation
A chain can be extended one residue at a time (stepwise) or assembled from short protected fragments that are made separately and then joined (fragment condensation, also called convergent synthesis). Fragment condensation saves steps on longer targets, but the activated C-terminal residue of each fragment is prone to racemization, meaning it can flip from the natural L-form to the D-form. Process chemists usually manage this by choosing fragment junctions at glycine or proline, which do not racemize in the same way, and by selecting low-racemization coupling conditions.
Tag-Assisted LPPS: The "Third Wave"
The weak point of classical chemistry is isolation. Every intermediate behaves differently, so each step needs its own work-up, which is slow and hard to standardise. Tag-assisted LPPS fixes this by attaching the C-terminus of the chain to a soluble group that controls how the whole molecule behaves.
The 2022 Chemical Reviews article groups the tags that have been reported into several families:
- Polyethylene glycol (PEG) supports, which keep the chain soluble during coupling and allow precipitation afterwards
- Membrane-enhanced peptide synthesis, where a large tag lets membranes hold the chain back while small reagents pass through
- Fluorous tags, separated by fluorous-phase extraction
- Ionic liquid supports
- PolyCarbon and hydrophobic polymer tags
- Group-assisted purification (GAP), where the tag lets the product be purified by washing or precipitation instead of chromatography
Two commercial systems come up most often:
Molecular Hiving. Bachem describes this as a tag-assisted LPPS method it uses under an exclusive licence from Jitsubo, based on work by Professor Kazuhiro Chiba at Tokyo University of Agriculture and Technology. According to Bachem's technology material, it uses the same standard Fmoc amino acid derivatives as SPPS, and excess reagents and coupling and cleavage by-products are removed by aqueous extraction alone. Bachem lists LPPS, SPPS and its tag-assisted peptide synthesis (TAPS) platform among the technologies at its Bubendorf site.
AJIPHASE. Developed at Ajinomoto, this approach uses a hydrophobic tag (a fluorene-derived anchor in the original work by Takahashi and Yamamoto, reported in Organic Letters in 2012) that keeps the chain soluble during coupling and makes it precipitate when a polar solvent is added. Related tags were later described for peptides that end in a C-terminal amide.
These claims come from the developers and licensees, so read stated benefits such as lower solvent use as the companies' own descriptions rather than independent findings.
Hybrid Strategies: Combining SPPS and LPPS
For longer peptides, manufacturers often make protected fragments by SPPS and then join them in solution. The best-known public example is enfuvirtide, a 36-residue peptide. A 2003 article by Bray in Nature Reviews Drug Discovery described how its manufacturing route assembled three protected fragments on resin and then coupled them in solution, an approach chosen because neither method alone was practical at the volume required.
Bachem's knowledge-center material also names native chemical ligation as a separate route for joining unprotected fragments, with the limitation that it needs a cysteine (or a cysteine derivative) at the ligation site, plus a desulfurization step when the sequence has no suitable cysteine.
Where LPPS Is Actually Used
According to Bachem's published technology table, LPPS is typically applied to peptides shorter than about 10 amino acids and to large-scale synthesis. A 2013 review by Bachem authors in the Swiss journal Chimia noted that solution synthesis was still used for short to medium-sized peptide APIs at large scale, naming LHRH agonists such as goserelin and leuprolide, and that solution methods had also produced longer peptides such as somatostatin and calcitonin at scale. CordenPharma describes LPPS as the technology of choice for short peptides and for structures that are hard to make on a solid support.
The research peptide market looks different. Most compounds sold for laboratory research, such as BPC-157, TB-500 fragments, ipamorelin or CJC-1295, are made in milligram to gram quantities, where automated Fmoc SPPS is faster and cheaper. Vendors rarely state which method their contract manufacturer uses, so a buyer should not assume either one.
LPPS vs SPPS: The Points That Matter
| Question | Classical / tag-assisted LPPS | SPPS |
|---|---|---|
| Best fit | Short sequences, large batches | Research quantities, longer sequences up to roughly 50 residues |
| Intermediates | Can be isolated and analysed | Stay on the resin until cleavage |
| Excess reagents | Lower excess needed in solution | Large excess used to drive each coupling |
| Main impurity risks | Racemized residues, fragment-coupling by-products, residual tag | Deletion and truncated sequences |
| Automation | Limited, improving with tag methods | Highly automated |
What This Means When You Read a COA
The synthesis method is not printed on most research peptide certificates, and it does not need to be. What matters is whether the final material is the right molecule at the stated purity. Still, knowing the method helps you read the data:
- HPLC purity catches most related impurities from either route, including deletion sequences and many by-products. Our guide "Understanding Peptide Purity: HPLC vs Mass Spec" explains how the percentage is calculated.
- Mass spectrometry confirms the molecular weight, but a racemized residue has the same mass as the natural one. Telling L- and D-forms apart needs a chiral method, which few research COAs include.
- Peptide content (net peptide) is separate from purity. Any process can leave water, counter-ions such as acetate or TFA, and salts in the powder.
For how to check that a COA belongs to the lot you received, see "How to Read a Certificate of Analysis" and "What Is a COA?" on this site. Our reviews of Ascension Peptides, Core Peptides, Amino Asylum and Swiss Chems summarise what each vendor publishes about third-party testing.
Frequently Asked Questions
Is liquid-phase peptide synthesis the same as solution-phase synthesis?
Often the terms are used as synonyms. In the stricter sense used by the 2022 Chemical Reviews article, solution-phase means classical chemistry with free intermediates, and LPPS means synthesis in solution with the chain bound to a soluble tag.
Is LPPS better than SPPS?
Neither is better overall. LPPS is usually chosen for short peptides at large scale and for reducing reagent and solvent use; SPPS is usually chosen for speed, automation and research quantities. After proper purification, product from either route can meet the same purity specification.
Why does LPPS take longer?
Classical solution chemistry needs a separate isolation for each intermediate. Tag-assisted methods shorten this by making isolation the same every cycle, but they are still less automated than resin-based synthesizers.
Can a vendor tell me which method was used?
Some can, if they know their manufacturer's process. Many research vendors buy finished material and only publish final-lot testing, so the answer may simply be unavailable.
This article is for educational purposes related to peptide chemistry. All peptides discussed are for laboratory research use only and are not intended for human consumption.
